Provides sun coverage from almost all angles(no more squinting top down).
Keep the heater in at night, keep the ac in during the day!
Breaks down for trunk storage in seconds.
Does not interfere with soft top or hardtop (just adds on to your car).
Weight reduction (Soft tops or hardtops can weigh over 50 lbs).
Sleek custom tailored aggressive look.
The G-String top is made of Haartz German Cabrio Grain Vinyl or Haartz Stayfast Canvas. This is the same material as the OEM Soft Tops, and also what Robbins Auto Tops uses for their Miata Replacement Tops. Haartz material is often times used as a OEM brand for many car manufacturers when they produce convertible cars.
All tops will be professionally sewn and stitched to ensure the highest quality product. All fastening points are either reinforced internally or use metal, welded D-Rings.
G-Strings are all made to order.
Requirements:
Compatible Rollbar (HARD DOG, AUTO POWER, ZEREK FAB, ETC)
Factory Front Bow (Front portion of soft top frame and latches)
Measurement from back of rollbar to windshield header(where edge of paint is)
Frankenstein Bolts (Some cars may not have these, you can purchase them here)
6-8 Week estimated time frame for us to produce your top
*You will need a donor front bow(old soft top frame). Most people source one at their local Miata club or junk yard.
Classic Kit:
G-String Bikini Top
D-Rings & Straps
Center Brace
Description: Spoiler for use with Mazda Miata OEM Hardtop. Gives an aggressive look to an otherwise tame looking removable hardtop. A benefit that has been reported by more than a few customers is the fact it keeps the sun off the back of your neck. Attaches with 3M molding tape to the factory glass molding. (Necessary for standard installation)
Colors Available: Solid Gloss Black
Translucent Smoke
G-Wing Hardtop Spoiler by Project-G
1 – G-Wing w/ 3M Tape(Installed)
1 – 3M Adhesive Promoter Pad
Select options
This product has multiple variants. The options may be chosen on the product page
Description:
Have you ever purchased a small wing or a replacement mirror? Is the color off or faded? Taking your car to the body shop means downtime without a car as well as hundreds of dollars. Our G-Paint is premixed off Mazda’s paint code using PPG paint and then transferred into an easy spray paint can. Our 12oz cans features quite a bit more paint than your traditional Rusteloleum cans at Home Depot.
There is no more “close enough” shades of paint. These are an exact match. Spraying your trunk lid or the top of your bumper might fix that little eyesore area on your car.
Typically, 1 can is more than enough for a big touch up job. You will need basic paint prep and primer skills to use this. Since this is automotive grade paint, it is UV stable as well as color sandable. You can wax it and buff it out like regular car paint because it IS regular car paint.
There are many youtube videos that will show you how to sand and prep an area for paint. You can use bondo and primer to prep the area. If you choose to spray this onto a non primered area, you may risk the original color showing through.
This PPG spray paint is thinned out and ready to use. We have used this on our personal cars.
*ALL SPRAY PAINT HAS TO BE SHIPPED VIA GROUND (ORM-D) TO ACCORDANCE WITH POST OFFICE/UPS RULES
Select options
This product has multiple variants. The options may be chosen on the product page
Description:
Have you ever purchased a small wing or a replacement mirror? Is the color off or faded? Taking your car to the body shop means downtime without a car as well as hundreds of dollars. Our G-Paint is premixed off Mazda’s paint code using PPG paint and then transferred into an easy spray paint can. Our 12oz cans features quite a bit more paint than your traditional Rusteloleum cans at Home Depot.
There is no more “close enough” shades of paint. These are an exact match. Spraying your trunk lid or the top of your bumper might fix that little eyesore area on your car.
Typically, 1 can is more than enough for a big touch up job. You will need basic paint prep and primer skills to use this. Since this is automotive grade paint, it is UV stable as well as color sandable. You can wax it and buff it out like regular car paint because it IS regular car paint.
There are many youtube videos that will show you how to sand and prep an area for paint. You can use bondo and primer to prep the area. If you choose to spray this onto a non primered area, you may risk the original color showing through.
This PPG spray paint is thinned out and ready to use. We have used this on our personal cars.
*ALL SPRAY PAINT HAS TO BE SHIPPED VIA GROUND (ORM-D) TO ACCORDANCE WITH POST OFFICE/UPS RULES
Select options
This product has multiple variants. The options may be chosen on the product page
From late 2010 Project-G started down a slow road to their vision on the front fenders for the NA out of necessity. First concentrating on the top profile to get the look we were after, and at the same time gaining the clearance we needed. Mid 2012 hit and one of the fenders suffered some damage, so it was time to get busy on this ongoing project.
To the unsuspecting observer, the fenders look to be factory. To the enthusiast, there is a lot going on here. They swallow up 15×9 +0 wrapped in 195/50’s with ease. (15×9-8 pictured) We kept the edges smooth and clean as to minimize the chances of catching a tire on the lip and shredding some expensive rubber or even worse, ruining a fender.
Our recess behind the wheel was conceived with our corner flare in mind. We feel the compliment each other rather nicely and add to that subtle, aggressive look we are always after.
Weight Savings:
OEM Fender = 6.4 lbs each
Prototype Fiberglass Fender = 2.1 lbs each
*These are produced to order, ETA on shipping is approximately 21 days.
Stubby Style Antenna (Direct Replacement) for NA/NB $74 MSRP
Application: Mazda Miata 89-05 (NA/NB)
Description:
Stubby Style Antenna
directly replaces a powered or non powered antenna in all Miatas from 90-05.
Never have to worry about your antenna mast breaking off or snagging something again!
This antenna is also powered to provide a superior reception upgrade to the stock one. It is extremely light weight in comparison to the heavy powered assembly.
‘*you do not have to run power to this, it is optional (better reception)
This inexpensive replacement antenna installs in seconds and gives your car an awesome look.
Includes:
Instructions
Hardware
Antenna/Power Wire Cable(long enough to reach your headunit/radio).
So even if you do not have a wire harness on your car, this kit will give you everything necessary to add an antenna to your car.
Description:
The Corner Flare provides an aggressive appearance to the rear fender, accentuating the natural flared appearance of the factory rear fenders. In addition, the Corner Flare also diverts the airflow around the front surface of the tire which is exposed in factory trim with any type of aggressive wheel / tire fitment. The Corner Flare attaches as any standard body kit panel. This is one of the components to our G-Fuser System. A lot of people have used these Corner Flares in conjunction with various side skirts and fender flares.
*Comes with factory lower rocker panel texture which can be sanded to match) (Professional installation recommended)
Corner Flares by Project-G
2 – Corner Flares (Unpainted)
![G-String Bikini Top [ Project-G ] - 1990-2005 Mazda Miata](https://projectgla.com/wp-content/uploads/2017/09/gstring_na7-300x300.jpg)
![G-Wing Hardtop Spoiler - Black / Smoke [ Project-G ] - 1990-2005 Mazda Miata](https://projectgla.com/wp-content/uploads/2017/09/gwing_na_smoke5-300x300.jpg)
![Aero Fenders [ Project-G ] - 1990-1997 Mazda Miata](https://projectgla.com/wp-content/uploads/2017/09/pg_fender7_zpsbb9ea097-300x300.jpg)
![Corner Flares [ Project-G ]- 1990-1997 Mazda Miata](https://projectgla.com/wp-content/uploads/2017/09/corner_flare_3-300x300.jpg)
